Daikin FDKS25EAVMB Manual de Instalação

INSTALLATION MANUALR410A Split SeriesModels FDXS25EAVMB FDKS25EAVMBFDXS35EAVMB FDKS35EAVMBFDXS50CVMB FDKS50CVMBFDXS60CVMB FDKS60CVMBEnglishDeutschFran

English 8DRAIN PIPING WORKCautionMake sure all water is out before making the duct connection. Install the drain piping.• Make sure the drain works

9 EnglishINSTALLING THE DUCTConnect the duct supplied in the field.Air inlet side• Attach the duct and intake-side flange (field supply).• Connect th

English 10WIRINGSee the installation manual supplied with the outdoor unit. HOW TO CONNECT WIRINGS. • Wire only after removing the control box lid a

11 EnglishTRIAL OPERATION AND TESTING(1) Measure the supply voltage and make sure that it falls in the specified range.(2) Trial operation should be

(0701) HT3P132003-3N M05B026CTwo-dimensional bar code is a code for manufacturing.00_CV_3P132003-3N.fm Page 2 Wednesday, November 29, 2006 6:40 PM

Umeda Center Bldg., 4-12, Nakazaki-Nishi 2-chome,Kita-ku, Osaka, 530-8323 Japan 3P132004-3EFDXS25EAVMB, FDXS35EAVMB, FDXS50CVMB, FDXS60CVMB, FDKS25

1 EnglishSAFETY PRECAUTIONS• Read these Safety Precautions carefully to ensure correct installation.• This manual classifies the precautions into WAR

English 2ACCESSORIESCHOOSING A SITE• Before choosing the installation site, obtain user approval.Caution• When moving the unit during or after unpack

3 EnglishCHOOSING A SITESelect the signal receiver mounting location according to the following conditions:• Install the signal receiver, which has

English 4 Mount chamber lid and air filter (accessory).For bottom intake, replace the chamber lid and the protection net (only for 25-35 type) in th

5 EnglishPREPARATIONS BEFORE INSTALLATION When two indoor units are installed in one room, one of the two wireless remote controllers can be easily

English 6OUTDOOR UNIT INSTALLATION Install as described in the installation manual supplied with the outdoor unit.REFRIGERANT PIPING WORK See the ins

7 EnglishREFRIGERANT PIPING WORK 3) After the work is finished, make sure to check that there is no gas leak.4) After checking for gas leaks, be sure