
Page 24 of 36 / OM 1169-1
Main Menu
Quick Reference
Figure 13: Main menu quick reference
Menu Item Description Page
Schedule
Daily Patterns
Settings
Used to schedule the dates and times of events such as set point changes and turning the controller off
(unoccupied) or on (occupied).
See below
Off Timer
Used to set each operation period of the system.
Possible to set in 10 minute increments from 30 to 180 minutes.
page 27
Celsius / Fahrenheit Used to select whether temperature values will be displayed in Celsius or Fahrenheit. page 12
Maintenance Information Used to display the maintenance information. page 12
Conguration Contrast Adjustment Used to make LCD contrast adjustment. page 28
Display
Standard or Detailed
Display
Used to set standard or detailed display mode.
Display mode (Standard or detailed display).
Detailed display provides the choice to display between Room Temp, Outside Air Temp, System or None.
page 11
Current Settings Used to display a list of current settings for available items. page 30
Clock & Calendar
Date & Time
Used to congure date and time settings and corrections.
The default time display is 12H.
The clock will maintain accuracy to within ±30 seconds per month.
If there is a power failure for a period not exceeding 48 hours, the clock will continue working with the
built-in backup power supply.
page 10
12H/24H Clock The time can be displayed in either a 12 hour or 24 hour time format. page 10
Daylight Saving Time Used to adjust the clock in observance of daylight saving time. page 9
Language The display language can be selected between English, Français or Español. page 9
Note: Available setting items vary with the WSHP unit model.
Schedule
Setting The Schedule
Note: The schedule cannot be enabled when a multi zone
controller such as the Intelligent Touch controller is
connected.
Step 1.
Display the main menu screen by pressing the Menu/OK button.
Press ▼▲ buttons to select
Schedule
.
Setting
Main Menu
Schedule
Off Timer
Celsius / Fahrenheit
Maintenance Information
1/2
Press Menu/OK button to display the schedule screen.
Note: Before setting the schedule, the clock must be set.
If the clock has not been set, a screen like the one below will
appear. Refer to “Setting The 12H/24H Clock” on page 10.
Press ◄► buttons to select
Yes
and press the Menu/OK
button.
Setting
Clock has not been set.
Would you like to set it now?
Schedule
Yes No
Daily Patterns
Step 1.
Select “Schedule” from the Main Menu. The schedule screen
will appear.
Press ▼▲ buttons to select
Daily Patterns
on the schedule
screen.
The daily patterns screen will appear when the Menu/OK but-
ton is pressed.
Setting
Schedule
Enable/Disable
Daily Patterns
Settings
2/2
Step 2.
Press ▼▲ buttons to select
7 Days
,
Weekday/Weekend
or
Weekday/Sat/Sun
on the daily patterns screen.
The conrmation screen will appear when the Menu/OK but-
ton is pressed.
Setting
Daily Patterns
Schedule
7 Days
Comentários a estes Manuais